Send Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
For the wire and cable industry, the most obvious material alternative is to use aluminum conductors instead of copper conductors. In the copper, aluminum cable relative cost, you need to consider the price, weight and conductivity and other factors, in order to draw the aluminum conductor is the real cost-saving answer. Copper is heavier than aluminum. The specific gravity of copper is 8.9g.cm3, the specific gravity of aluminum is 2.7g / cm3, that is to say, the weight of copper conductor is 3.3 times that of aluminum conductor under the same conductor specifications. However, the electrical conductivity of aluminum is only 61% of that of copper, that is to say, the aluminum conductor has a cross section of 61% greater than the copper conductor at the same transmission current. Therefore, in terms of conductor weight, to make both conductors have the same current carrying capacity, the weight of copper conductor required is about twice the aluminum conductor. The price ratio of copper and aluminum is about 3.5 or so, so the cost of equivalent copper conductor is 7 times that of aluminum conductor.
Of course, the simple cost comparison described above does not explain all the problems. Since the cable product is a product with the standard conductor specifications, it is not possible to buy an aluminum cable with the same electrical conductivity as the copper cable. Therefore, if cables are made of aluminum conductors, a larger aluminum conductor must be used. Experience has shown that in the case of the same current carrying capacity, aluminum conductor cable conductor cross-section should be 2 times the cross-section of copper cable conductor. Since the aluminum conductor length is twice as large as the conductor length of the copper conductor, the consequent increase in insulation, sheathing and sheathing of the aluminum conductor cable impairs the price advantage of using an aluminum conductor. This means that the price advantage of aluminum compared to copper is insignificant, since the conductor is only a fraction of the total cost of the cable, after all.
Taking a 70mm2 copper-core cable as an example, the cost of a copper conductor is about 65% of the cost of the entire cable, while the cost of a 120mm2 aluminum cable carrying the same amount of current can be saved by 23.5%. If the copper conductor costs 80% of the cost of the entire cable, the savings of up to 46% in aluminum-core cables with equivalent current carrying capacity can be achieved. Aluminum cables lose their cost advantage only if the cost of copper conductors in the cable drops below 50% of the cost of the entire cable. The cost of most of the copper low voltage cables and many medium voltage cable conductors is now over 50%, so the cost savings of aluminum power cables are considerable when compared to copper power cables .
November 16, 2024
November 14, 2024
September 18, 2023
June 28, 2024
June 28, 2024
この仕入先にメール
November 16, 2024
November 14, 2024
September 18, 2023
June 28, 2024
June 28, 2024
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.